High pole light configuration solar street light-litelsolar manufacturer

High pole light generally refers to a new type of lighting device composed of a steel cone light pole with a height of 15 meters or more and less than 35 meters and a high-power combined light frame. It is composed of lamp holder, internal lamp electrical, rod body and basic part. High pole lights have a wide range of applications, such as city squares, stations, docks, freight yards, highways, stadiums, and overpasses. Material control: In view of the open-air working environment of high-pole lamps, the parts made of steel such as lamp poles are all dipped in zinc, which is resistant to corrosion for 30 years. The steel adopts plug-in type or inner flange type. Aluminium profiles are oxidized. Stainless steel, aluminum parts, standard parts exposed to the open air are made of stainless steel. The electrical contact parts are brass or silver-plated electrolytic copper, and the suspension steel cables are stainless steel, and comply with the current national installation standards. Hot-dip galvanized not less than 80um and passivated. Equipped with lighting fixtures: aluminum die-casting shell, easy to dissipate heat, can effectively control temperature and prolong life. The tempered glass can withstand rapid changes and has thermal stability. The interior is smoldering and high temperature resistant wiring. The wire inlet has a sealing device to effectively prevent moisture from entering. The protection level of the lamp is IP65 or above, and the lamp holder can withstand a wind speed of 30m/s. Light source: high-pressure sodium lamp or high-light LED light source with long life and high efficiency, with instant re-triggering function, usually 200W-1000W, etc. Power supply voltage 220v. The composition of the lift-type high-pole lamp: it is composed of a lamp panel (the lamp on it), a lamp pole, a lifting and hoisting system, and an electrical device. 1. The lamp panel can be raised or lowered, which is convenient for maintenance and repair. The lamp panel is made of high-quality steel plate. It is equipped with lamps, light sources, ballasts, triggers, hook assemblies, terminals, etc. 2. The light pole is a one-time formed polygonal pyramid pole, generally 3-4 sections, and each section is 7-10 meters long. The lamp pole is rolled and formed with high-quality steel plate, and the inner and outer surfaces of the lamp pole are hot-dip galvanized and then sprayed with plastic. Using stainless steel fastening screws, safe and beautiful. The top of the light pole is fixed with a pulley block, a travel switch, a hook device, a rain cover, and a lightning rod integrated into the light pole. There is an electric door at the bottom of the pole, which is equipped with a lifting and hoisting system and an electrical device. The edge of the electric door is welded with a door frame to make up for the decrease in strength after the lamp body is opened. The electric door cover has a waterproof guard ring to prevent the infiltration of rainwater. 3. Lifting and hoisting system: The lifting system is a core part of the high-pole lamp. The lifting action of the lamp panel is completely dependent on the lifting system. The lifting system of the high-pole lamp is mainly a hoist and a wire rope. If the wire rope is not damaged, the hoist is more than ten It can't be broken for years. The winch is installed in the light pole, and the wind is not blowing or raining, so it will not cause the aging of the line. Secondly, the winch is rarely started. If the light source of the lamp head is not bad, it will not go. move it.