How to install solar street lights?

  Many people worry that they don't know how to install solar street lamps after receiving them. In truth, the installation of solar street lights is much easier in comparison to a traditional led light. It’s very easy to place solar street lights in any area, whether a remote area or a highly residential area. Solar street lights are a very cost-effective, eco-friendly, and hassle-free lighting system.

u Before you start a street light installation, prepare the following tools:

20m start-up hoist, Inner hexagon wrench, and Monkeywrench

u What do you need to prepare before installation?

Before the start of any installation, make sure to do the following steps.

1. Surround the construction area with guard lines. Only installation specialists and personnel must be allowed in the construction area.

2. Read the installation manual and familiarize yourself with the installation procedures and the safety measures you must take before you proceed with the installation.

3. Make sure that you have the complete solar street lights kit. Check that you have the following parts:

Solar panel  Solar panel Bracket  Lamp body  Lamp pole  Flange  Ground Cage

u Installation Procedures for a Solar Street Light

1. Installation of the Foundation

To install the foundation of your solar street light, choose a level and flat ground, with no inclination. Screw and secure the ground cage to the ground using the four screws. One side of the ground cage should be parallel to the edge of the road. Secure the ground cage with concrete, and this will serve as the foundation of your street light.

2. Setup the Street Lamp

1) Lift the lamp pole off the ground for 1 meter, with the use of a supporting bench.

2) Install and secure the Solar Bracket at the top of the lamp pole. Place the Solar panel on the Solar panel Bracket and secure it with bolts. Solar panels should be handled with care.

3) Install the Light Fixture on the lamp pole. Place the Light body on the ground, with the back part facing upward. Press the red buttons on both sides of the Light body. Turn the Light Fixture around, and screw the plastic black lamp holder. Place the LED light bulb in the holder. If electronic ballast is needed, place it inside the light fixture. Follow the circuit diagram when you connect the light fixture to the controller. Connect and secure the light fixture to the lamp pole.

4) Check installation and connections to confirm that everything is in the right place. Make sure that wires and components are connected according to the electrical circuit diagram.

5) Use a crane to erect the lamp pole. Ensure that the lamp pole is upright on the bottom plate. Fix and secure it with bolts.

“Litel Solar” also offer Various Light pole besides various solar lights, such as Columniform light pole, tapered straight+A-type light arm, self-bending arm light pole, etc. So welcome to contact us freely if you need the light poles or have any questions about the installation of solar street lights, we are very willing to give you some advice.