LED luminous efficiency reaches 80-200 lumens/watt, narrow spectrum, good monochromaticity, almost all the emitted light can be operated, and it emits super light directly without filtering.
2, high energy saving
has the characteristics of low voltage, low current and high brightness. The light energy emitted by a 10-12 watt LED light source is equivalent to the light energy emitted by a 35-150 watt incandescent lamp. The same lighting effect LED is 80% to 90% energy-saving than traditional light sources.
3, more light color
can choose white or colored light, red, yellow, blue, green, yellow-green, orange-red, etc., and can make multi-color combinations and cyclically changing colors as needed. The LED light source can operate the three primary colors of red, green, and blue. Under the control of computer technology, the three colors can have 256 gray levels and mix arbitrarily, then 256×256×256u003d16777216 colors can be generated. The combination of different light colors can change endlessly, realizing rich and colorful dynamic change effects and various images.
4, high safety
The LED light source is driven by low voltage, the light is unchanged, there is no pollution, no flicker, no ultraviolet B band, the surface color/body Ra value is close to 100, the color temperature is 5000K, the closest to the sun's color temperature is 5500K.
5. The variety of design shapes
The domestic LED light source is composed of many single LED light-emitting tubes. The LED light source is a chip light source, so it can be made into more shapes than other light sources. It is easier to design the shape and size of the light source according to the user's environment.
6, long life
LED light source Some people call it a longevity lamp, which means a lamp that never goes out. The LED operates the solid semiconductor chip to convert electrical energy into light energy, and is encapsulated with epoxy resin, which can withstand high-intensity mechanical shock. The life of a single LED tube is 100,000 hours, and the life of the light source is more than 50,000 hours. Over years, the maintenance cost is low.
7、Quick response
The response time of LED luminous tube is very short, and it can ensure the work switching between multiple light sources or between the different areas of a light source as required. When a dedicated power supply is used to supply power to the LED light source, the time to reach the maximum illuminance is less than 10ms.
8. The layout of lamps is reasonable
LED lamps will completely change the layout of the lamps. According to the different professional use requirements, the layout of the LED lamps will increase the brightness again under the condition of increasing the initial brightness. With the improvement of the optical lens, the luminous brightness will be regained. improve.
9、Environmental protection
Better environmental benefits, there is no ultraviolet and infrared in the spectrum, no heat, no radiation, little glare, and the waste is recyclable, no pollution, no mercury, cold light source, safe to touch, it is a typical green Lighting source
10, Gaoxinjian
Compared with the monotonous luminous effect of traditional light sources, LED light sources are low-voltage microelectronics products that successfully integrate computer technology, network communication technology, and image processing technology. Embedded control technology, so it is also a digital information product, it is the 'high-tech tip' technology of semiconductor optoelectronic devices. Jiangsu Naite Lighting Electric Co., Ltd. is engaged in the production and design of solar street lamps and high-pole lamps. It has 20 years of solar street lamp production experience. To create the most professional solar street lamp manufacturer, contact number: 13805257308. , It has the characteristics of online programming, unlimited upgrades, and flexibility.
11, low operating cost
Other light sources not only consume 2 to 10 times the power of LED light sources, but they also need to be changed almost every month. Hua has spent a lot of valuable time on maintenance engineers. Moreover, the more light sources put into use, the greater the cost of device replacement and labor, and the initial investment savings will soon be offset by routine maintenance and repair costs. Therefore, it is very economical to choose a long-life LED light source in the long run.
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist
