The process of modularization of LED street lights is accelerated, and it is easier to solve the problem of waterproofing

The process of modularization of LED street lights is accelerated, and it is easier to solve the problem of waterproofing

　　 It is understood that in LED outdoor lamps, there is a fatal 'breathing effectshrink. The lamp undergoes this 'breathing effect' every day, and a certain amount of water vapor will be inhaled into the cavity.



　　' It is easy for water vapor to enter street lights but difficult to get out. Over time, it consolidates into water droplets, which will eventually corrode LED devices and PCB boards and cause street lights to lose effectiveness. Therefore, it is critical to make LED street lights and improve the waterproof level. .' Getian Optoelectronics sales general manager Zheng Xiantao hinted to reporters.



　　 The reporter learned that based on the need for waterproofing, Getian Optoelectronics has launched a flip-chip LED street light module. 'This type of module has the advantage of miniaturization, which is more advantageous for waterproofing. Because of its small size and reduced lens area, Jiangsu Naite Lighting Electric Co., Ltd. is engaged in the production and design of solar street lights and high-pole lights. It has 20 years of solar energy Street lamp production experience, to create the most professional solar street lamp manufacturer, contact number: 13805257308. The number of screws required is also greatly reduced, thereby reducing the difficulty of waterproofing.' Introduced.



　　 And we also believe that LED outdoor lighting technology is difficult. At present, there are many factors that affect the life of outdoor lighting. Insufficient protection level is one of the reasons for the failure of lamps.



　　 'Standardized modules can solve the problem of waterproofing.' Our company’s LED street light module products choose the highest IP68 protection level, which can withstand the pressure of 2 meters underwater and completely isolate the entry of water vapor from the distance. Ensure that the lamps can work normally regardless of the coastal high humidity or the ultra-low temperature snow in the north.



　　'For the whole panel street lamp, it is impossible to achieve IP68 protection level, because the sealing body of the whole panel type is too large, the length of the sealing line of the large sealing body is relatively long, and the probability of water ingress is also higher. Big. At this time, the advantages of modular solutions are reflected.'



　　 The products currently on the market all adopt the dual coupling sealing process and have passed rigorous tests. In addition to ordinary underwater tests, they must also pass the 100 ℃ boiling water test. In the double protection, each dish has to go through the test of boiling water for more than 30 minutes. After cooking, it will be put into cold water immediately, and its waterproof ability will be checked by means of quenching.



　　 Only products that have undergone rigorous testing can settle in this market.