LED lights cooled by heat pipes, the lighting effect is more unchanged

LED lights cooled by heat pipes, the lighting effect is more unchanged

　　 Recently, Jack Dyson, the son of British discoverer James Dyson, has just released one of his research and development functions: operating heat pipe technology to cool LED lighting fixtures, so that they can achieve more continuous and constant lighting Effect.



　　 This technology is said to have taken Jack Dyson and the team of engineers behind him for ten years. Previously, the heat pipe cooling technology was mainly used in the heat dissipation of satellites and processors, and no one had ever thought of applying it to the scale of civil lighting.



　　 The CSYS desk lamp using this technology has built-in 8 high-power LED lamp beads spaced 8mm apart, and can be arranged densely in 8mm, so it finally achieves an output of 648LUX in a space of 1 square meter (about ordinary Several times of the white fabric lamp) parameters, and has 144,000 hours of continuous high-brightness output life.



Although the 　　 LED luminous particles are greatly reduced compared to traditional lighting fixtures, some high-brightness models still have higher operating temperatures, which will have a significant impact on life when used for a long time. In general LED lighting fixtures, more traditional passive metal heat sinks are used. Although there is no problem in coping with general brightness, if you want to use high-brightness and ultra-high-brightness LED devices, the heat dissipation effect cannot be guaranteed.



　　 The basic principle of this technology is that a vacuum-sealed copper tube laid along the horizontal lamp holder is set in the lighting lamp. Each sealed copper tube is sealed with a drop of water. After turning on the light, the heat generated by the LED turns the water in the tube into steam. Under the influence of the pressure difference, the steam starts to move along the tube. Once the steam reaches the cooling zone of the copper pipe, it will condense and change back to water, dissipating heat and energy. Then, the water is sucked back to the target of the LED, and the cooling cycle of the LED starts again.



　　 CSYS lighting adopts 3 Axis Glide three-axis positioning design, the lamp tube can move vertically and horizontally along the low-friction bearing, and the zinc alloy counterweight base can be rotated 360° smoothly.



　　 In addition, Jiangsu Naite Lighting Electric Co., Ltd. is a manufacturer engaged in the production and design of solar street lamps and high-pole lamps. It has 20 years of solar street lamp production experience and builds the most professional solar street lamp manufacturer. Contact number: 13805257308. , The product also supports stepless dimming, automatic brightness memory settings. The product also has two fancy styles, floor-standing and table-top.