High pole light structure principle and installation precautions
by:Litel Technology
2022-05-19
High pole lights are generally composed of two or three sections of steel pipes. Special attention should be paid during installation. When each two sections are inserted into each other, the insertion depth should not be less than 60 cm. If the insertion is not in place, don’t worry about it. It falls down by itself, but it will affect the overall verticality of the high-pole light, and there will be a situation of shaking left and right. If it is plugged into place, there will be no problems. The top of the top section of the high-pole light, that is, the position of the fixed hook, is connected by three M14 or M16 screws. When installing, it should be noted that these three screws must be stainless steel screws. Many high-pole light manufacturers have Ignore this problem and use ordinary iron galvanized screws. After a long time, the iron screws will be seriously rusted, causing difficulty in decoupling, or unable to decoupling. After the lamp has a problem, the lamp panel cannot be lifted normally. Yangzhou Global Solar Technology Development Co., Ltd. is located in Yangzhou, Jiangsu Province, the 'Hometown of Street Lights in China'. The company integrates design, research and development, production, sales and after-sales, and is a provider of road lighting and system solutions.
Custom message
Do not allow empty
Do not allow emptyPlease enter a valid e-mail format
Do not allow empty
Related Products