The main content of daily maintenance of high pole lights: solar street light-litelsolar production

1. Check the hot-dip galvanized anti-corrosion condition of all ferrous metal components (including the inner wall of the lamp pole) of the high-pole lighting facilities, and whether the anti-loosening measures of the fasteners meet the requirements (the anti-corrosion quality should meet the requirements of GB/T9790, GBJ36011 and GB/T11373). The relevant provisions). 2. Check the verticality of the high pole lighting facilities (the theodolite must be used for measurement and testing regularly as required), and the allowable error of the pole point should be less than 3‰ of the pole height. The straightness error of the pole axis shall not be greater than 2‰ of the pole length. 3. Check whether there is rust on the outer surface of the lamp pole and the welding seam. For those who have experienced a long service period but cannot be replaced, if necessary, use ultrasonic inspection, magnetic particle inspection and other inspection methods to detect and test the welding seam. 4. Check the mechanical strength of the lamp panel to ensure the safe use of the lamp panel. For the closed lamp panel, check its heat dissipation; 5. Check the fastening bolts of the lamp bracket and adjust the projection direction of the lamp reasonably; 6. Carefully check the inside of the lamp panel The use of wires (flexible cables or cords) depends on whether the wires are subjected to excessive mechanical stress, aging, cracks, exposed wires, etc. If there is any unsafe phenomenon, they should be dealt with immediately; 7. Damaged light source appliances and other components 8. Focus on checking the lifting transmission system: 9. Check the power distribution and control equipment 10. Check the electrical safety performance, check the insulation resistance between the power supply line and the ground: not less than 10M? 11. Protective grounding and Lightning protection device inspection 12. Measure the plane of the foundation panel with a level ruler, analyze the uneven settlement of the foundation based on the inspection results of the verticality of the light pole, and make corresponding treatments. 13. Regular on-site measurement of the lighting effect of high pole lights. Yangzhou Global Solar Technology Development Co., Ltd. is located in Yangzhou, Jiangsu Province, the 'Hometown of Street Lights in China'. The company integrates design, research and development, production, sales and after-sales, and is a provider of road lighting and system solutions.