What are the conditions for installing solar street light in rural areas?

Yesterday, a Cangzhou customer asked what conditions would be required for a solar street light in rural areas? Nowadays, in order to make the countryside present a new look, the new rural construction project is in full swing, and the installation of led solar street light in rural areas is an important part of the lighting of beautiful new rural roads. Of course, in order to make led solar street light work normally and efficiently, the installation of rural solar street lights also has some requirements for geographical location. Let's take a look with solar street light manufacturers for details. 1. The place where the rural led solar lights are installed should avoid too many obstructions, such as leaves, buildings and other obstructions to block the light, which affects the absorption and utilization of light energy, resulting in a decrease in the charging efficiency of solar panels. Solar panels are installed under power lines, tree branches, light poles or other obstructions, resulting in a shadow on the solar panel during the day. Because the cells of the solar panel are generally multiple strings, if there is a shadow on a string of cells of the solar panel, and the shadow is relatively deep, if it is serious, this string is equivalent to an open circuit, and if the solar panel has more In series and 1 in parallel, this solar panel will not generate electricity. Second, do not install lights symmetrically on both sides. The solar panels are inclined face to face. For the sake of beauty, some customers may install the solar panels in a symmetrical and inclined face-to-face, but if one side is oriented correctly, the other side must be wrong. On the wrong side, since there is no way for the light to reach the solar panel directly, the charging efficiency will be reduced. Third, the installation spacing of street lights should not be too large The spacing of led solar street lights in rural areas is determined by various factors such as the lighting power of street lights, the height of street lights, and the width of the road. Generally, 25-50m is more common. However, there are villages based on how many street lamps can be bought according to the budget, and then calculate the spacing. Or increase the spacing of street lights in order to save the budget, but solar street light manufacturers remind everyone that the spacing of street lights will affect the lighting brightness. 4. There should be no reference light source beside the solar panel. Pay attention to avoid having a reference light source beside the solar panel, which will cause the charging voltage of the solar panel to be above the light control voltage point, and the light cannot be turned on. For example: the sun
To live up to our responsibilities to serve and enhance the communities in which Guangzhou Litel Technology Co.,Ltd. works and lives and the society on which we depend.
Now you can buy cheap at wholesale price at Guangzhou Litel Technology Co.,Ltd.! Do visit Litel Technology for great deals!
The value you get from watching how Guangzhou Litel Technology Co.,Ltd. operates and runs our company and the potential mentorship you would get from us will go a long way towards helping customers understand our company.