Introduction to the list of solar street light procurement items

No. Project name ★Technical indicators and technical parameter requirements Technical requirements 1. Solar street light normally selects 121 sets of double-pitch street lights with a pole height of 10m and 3 sets of combined street lights with a pole height of 12m according to the road lighting design requirements and the actual conditions of the road. 90wLED lamp head, the lamp pole adopts single pole; combined street light source adopts 3*250wLED lamp head. Double pick solar street light and combined street light poles are made of Shanghai Baosteel Q235 steel plate, the plate thickness is required to be ≥4mm, the inner and outer surfaces of the lamp poles are required to be hot-dip galvanized, the thickness of the zinc layer is ≥85um, and the outer surface is hot-dip galvanized and surface-treated After that, it is sprayed with UV-resistant all-resin plastic powder, the thickness of the plastic layer is ≥100um, the surface is smooth, and does not change color. Three sections of reflective strips need to be added to the section 1.2 meters above the ground; the flange at the bottom of the light pole is welded inside and outside, and formed at one time; the flange material is Baosteel A3 plate with a thickness of 20 mm. 4 pieces of reinforcing ribs with a thickness of not less than 8mm are welded between the flange and the light pole, and the welding is full and there is no virtual welding. All lamp head accessories are built-in, and all need to be equipped with corresponding capacitor compensation devices and energy-saving ballasts, and a 1P air switch must be installed in the street lamp base. Light pole electrical doors and other wire-passing doors should be polished to remove slippery and sharp edges, so as to avoid damage to the wire insulation layer when passing the wire. All fixing bolts and nuts are made of stainless steel (anchor bolts and nuts are required to be galvanized). The cable threading channel inside the lamp pole is unobstructed, easy to thread, and there are no sharp edges, burrs, teeth and the like, so as to avoid damage to the cable; Lamp: The lamp structure is an integrated light source, die-cast aluminum shell and tempered glass transparent cover, The protection grade of the lampshade is IP65; the maintenance factor is 0.75; the base base meets the requirements of the construction drawing, the screw center of the base base is 232, the lamps meet the requirements of lightning protection and grounding, and the design and manufacture (construction) technology of the components meets the national standards. 2. The construction shall be carried out according to the drawings, and the drawings shall be provided by the owner. ps: 1. Solar street light should provide a complete set of lamp head product pictures when bidding; those who do not provide product pictures will be treated as invalid bids. The product qualification certificate (including the lamp qualification certificate, light source qualification certificate, component qualification certificate, material qualification certificate, etc.), product manual, packing list, and test qualification report shall be attached to the bidding. The sample of the winning bidder shall be retained with the purchaser.
Service-based companies as Guangzhou Litel Technology Co.,Ltd. are increasingly becoming more popular internationally.
Guangzhou Litel Technology Co.,Ltd. will continue to bring our industry nuances of style and approaches to solar lights which are consistent with our evolving aspirations.
To find a qualified at reasonable price, contact Guangzhou Litel Technology Co.,Ltd. at Litel Technology, a professional provider and tell them what you envision for your solar lights.