A brief introduction to outdoor garden lights solar street light-litelsolar manufacturers

Garden light is a kind of outdoor lighting fixture, usually refers to: outdoor road lighting fixtures below 6 meters, its main components are composed of: light source, lamps, light poles, flanges, basic embedded parts, because garden lights It has the characteristics of diversity, beauty and beautification and decoration of the environment, so it is also called landscape garden light. It is mainly used for outdoor lighting in urban slow lanes, narrow lanes, residential quarters, tourist attractions, parks, squares and other public places, which can prolong the time of people's outdoor activities and improve the safety of property. The development of garden lights in the 1990s has been widely used in urban slow lanes, narrow lanes, residential quarters, tourist attractions, parks, squares, private gardens, courtyard corridors and other public places on one side or two volumes of roads for road lighting. Improving the safety of people's travel at night is used to increase the time of people's outdoor activities and improve the safety of life and property. Yangzhou Yinghui Lighting Electric believes that it can change people's mood, improve people's mood, and can change people's concepts, creating a palette-like night of light and dark. During the day, garden lights can embellish the city scenery; at night, garden lights can not only provide necessary lighting and life convenience, increase residents' sense of security, but also highlight the highlights of the city and interpret the bright style, so that it has been used to this day and has developed into a mature industrial chain. . Common faults There are two types of common faults: one is high resistance fault; the other is low resistance fault. The so-called high-resistance fault means that the cable is blown, the measuring resistance of the instrument is large, or the insulation between phases or to the ground drops, but there is a certain resistance value; the so-called low-resistance fault means that the wire is short-circuited or completely short-circuited to the ground, and the current Increase, the power transmission tripping phenomenon. These two faults and their frequent occurrence pose a threat to the normal use of garden lights. Therefore, we must pay full attention to find out the reasons and countermeasures. Maintenance 1. Do not hang items on the lamp, such as drying quilts. 2. Frequent switching will greatly reduce its service life, so try to minimize the switching of lamps when using lamps; 3. If the lampshade is found to be tilted during use or cleaning, it should be corrected at will to maintain its appearance; 4. When adjusting the lampshade 5. Replace the aging lamp in time according to the light source parameters provided by the sign, and find that the two ends of the lamp are red, the lamp is black or there are dark shadows, lights, etc. When the tube does not turn on, the lamp should be replaced in time to prevent unsafe phenomena such as ballast burnout. Cleaning 1. Landscape garden lighting is generally dusty. Wipe it with a damp cloth when cleaning. Keep the movement in the same direction, do not rub back and forth, and the intensity should be moderate, especially for chandeliers and wall lamps. 2. Clean the interior of the lighting. When cleaning the bulb, turn off the light first. When wiping, you can remove the bulb and wipe it separately. If cleaning directly on the lamp, do not rotate the bulb clockwise to avoid the lamp cap being screwed too tightly and peeling off.