Why are embedded parts galvanized? solar street light-litelsolar manufacturers

1. I think it is very necessary to galvanize the embedded parts. According to the specification requirements, the curtain wall components are generally galvanized, but it is not clear that the embedded parts of the curtain wall must be galvanized, which is only an anti-corrosion method. The galvanized embedded parts generally reduce the grip with the concrete. The construction method is generally to paint the exposed surface of the embedded parts twice with red red paint, and then brush the welded parts with silver powder paint twice. Even if the ordinary embedded parts are hot-dip galvanized together with the anchor bars, it will cost 1.2 yuan per kilogram, so the processing cost of the construction unit will be reduced. It is not important whether the embedded parts are hot-dip galvanized or not. The key is to come up with convincing anti-corrosion measures. Maybe with the development of science and technology, there are better ways to deal with them. But at present, the treatment of hot-dip galvanizing is still the most economical and convenient. 2. It is not necessary to galvanize the embedded parts before they are knocked out. After knocking out, brush the anti-rust paint once, and after welding the corners, brush the anti-rust paint twice and brush the silver powder paint once. Remember to use a wire brush to clean up before the first paint. 3. Galvanized steel anchor plate should affect the welding quality, and the steel structure of large rigid connection is not galvanized. 4. The gripping force between the anchor bars of the embedded parts and the concrete is reduced after galvanizing, and the bearing capacity of the actual embedded parts is also reduced. It is best to hot-dip galvanize the exposed parts of the embedded parts, and the anchor bars are not Galvanized, but this is difficult to do, or impossible to do at all. 5. The embedded parts must be galvanized. The steel bars in the building structure are not galvanized because they have little contact with the outside world, while the glass curtain wall is exposed, in contact with the outside world, and may be in contact with rainwater. Rust will cause the curtain wall skeleton to fall off and must be galvanized. 6. Galvanizing of embedded parts is a waste. The purpose of galvanizing is to prevent corrosion of iron parts. Is it only possible to prevent corrosion by galvanizing? Without galvanizing, two coats of anti-rust paint can be applied on the exposed surface. 7. The outside of the embedded board of the embedded parts can be painted with anti-rust paint. Reinforcing bars do not need to be treated, otherwise they are wasted. 8. I asked the design institute, if the surface of the steel bar needs to be treated, it will affect the effect of concrete on it. The rivet bars of the embedded parts are the same. solar street light,solar street light manufacturer,high pole light,high pole light manufacturer,street light,street light manufacturer,street light,street light manufacturer,led street light,led street light manufacturer,street light pole,street light pole manufacturer,landscape light,landscape light manufacturer , Magnolia lanterns, Magnolia lanterns manufacturers, minority street lights Yangzhou Global Solar Technology Development Co., Ltd. is a manufacturer engaged in the production of outdoor road lighting, the main products are city circuit lights, solar street lights, high pole lights, led street lights, all kinds of special-shaped Landscape lights, magnolia lights, Chinese lights, street lights with ethnic characteristics, etc., welcome to visit our factory and consult and discuss business cooperation
Technology is a foundational component of today's fast-paced business environment. Guangzhou Litel Technology Co.,Ltd. who are digital natives are especially equipped to harness technology's power to establish, promote and grow our businesses.
Through our culture, our drive and the expertise of each individual employee, Guangzhou Litel Technology Co.,Ltd. is uniquely positioned to provide best-in-class services to a global customer base.
solar lights allows users to use in innovative ways that fit their individual needs, while at the same time providing cost-effective, reliable and user-friendly products.
Guangzhou Litel Technology Co.,Ltd.'s solar lights are sturdy, easy to operate, friendly work machines that deliver high-quality solar led flood lights suppliers for solar led flood lights suppliers purposes.
solar lights has a great positive reflects from our dear customers.