What should you know about the acceptance of Cangzhou solar street light before installation

Not only picking led solar street light is a technical task, but also need to know a lot about its installation and acceptance. Solar street light manufacturers will introduce to you what to know before installation and acceptance of solar street light in Cangzhou. 1. Before the installation and trial operation of solar street light in Cangzhou, it should be checked whether the number, model and specification of street light poles, lamps, solar panel components, controllers, and batteries are consistent with the contract. 2. The surface of Cangzhou solar street light pole needs to be treated with color spray, the color should meet customer requirements, and the spray paint has no quality problems. 3. Whether the pole position of the light pole is reasonable and whether it is perpendicular to the ground. The arm installation of led solar street light should be perpendicular to the center line of the road and fixed firmly. When installing on the pole, the installation height of the lamp arm should meet the design requirements, and the down-conductor should be tight and tight. 4. The base size, elevation and concrete strength grade should meet the design requirements. 5. The hand hole door of the light pole, the hand hole door design should be beautiful and generous. 6. Whether the diagonal dimension of the flange meets the requirements of the design drawings. 7. Each component is welded firmly without the phenomenon of virtual welding and leakage. 8. The solar light pole should meet the wind speed force calculation and force requirements specified in the national standard. 9. Check whether the anti-theft and lightning protection measures of street lamps are perfect. Solar street light manufacturers remind everyone not to think that acceptance is a trivial matter, and must be checked and checked carefully. If there is any leakage phenomenon or some parts have quality problems, you must contact the manufacturer to solve it in time to avoid affecting the installation process.