Solar cell selection solar street light-litelsolar manufacturer

l. Types of solar cells convert solar energy into electrical energy. The more practical ones are monocrystalline silicon, polycrystalline silicon, and so on. 2. The output power per unit area of u200bu200bthe Wp solar cell is about 127Wp/m2. Solar cells are generally composed of multiple solar cells connected in series, and their capacity depends on the total power consumed by the lighting source, line transmission components, and local solar radiation energy. The output power of the solar cell group should be more than 3-5 times of the power of the light source: (3-4) times or more in areas with abundant sunlight and short-term lighting, and (4-5) times or more on the contrary. 3. The average peak sunshine hours h solar cell output power Wp is the 10l standard defined by Europe under standard sunlight conditions, the radiation intensity is 1000W/m2, the air quality is AM1.5, and the battery temperature is 252C, the output of the solar cell work power. At different times and at different locations, the output power of the same solar cell is different. The so-called standard conditions are close to the sunlight conditions around noon on a sunny day. 4. The selection and installation of solar panels are generally above 5m, and the center of gravity is high. Most solar panels are suspended. In order to enhance the wind resistance of the whole set of equipment, multiple solar panels are generally selected to form the required component power.