Common specifications for litelsolar monitoring pole installation

The installation of monitoring poles not only greatly improves traffic conditions and travel safety issues. The community monitoring pole also greatly guarantees the safety of residents' property. Some customers have asked about the common specifications for installing monitoring poles, let's take a look at them together. The monitoring rod is composed of monitoring vertical rod, connecting flange, modeling arm, mounting flange and embedded steel structure. Commonly used hexagonal and octagonal monitoring rods, variable diameter monitoring rods, tapered monitoring rods, etc., choose the appropriate one according to the installation occasion. The common specifications of community monitoring poles are 3 meters and 4 meters poles, and the horizontal arm is about 0.8-1 meters. The commonly used specifications of road monitoring poles are 5 meters, 6 meters and 8 meters poles, and the horizontal arm is more than 3-4 meters. The installation specifications of monitoring poles in scenic parks are similar to those of residential monitoring poles. For special ones, we can install and customize them according to customer requirements. The monitoring pole manufacturer reminds that the flatness of the concrete pouring surface of the foundation is less than 5mm/m and try to maintain the level of the embedded parts of the pole. The flange of the embedded part is 20~30mm lower than the surrounding air, and the reinforcing ribs are covered with C25 fine stone concrete to avoid water accumulation. At the same time, beside the pole, next to the control box, at the bend of the cable, when the straight length of the cable pipe exceeds 50 meters, or when the cable pipes at both ends are not on the same plane and the distance is more than 100mm, a hand hole must be set up. The inner size of the hand hole well is required to be 500 (length) × 500 (width) × 600 (depth) MM, and the gravel layer is used for water seepage; the four walls of the hand hole well must be plastered with cement mortar. The shape and size of the monitoring rod meet the user's requirements, the shape is smooth and harmonious, the appearance is elegant, the color is uniform, and the diameter of the steel pipe is reasonable. The monitoring vertical rod is a cylindrical structure, and any section of the circular rod body is not out of round. Rod roundness standard ≤ 6. 35mm. The surface of the rod body is smooth and consistent, and there is no transverse weld. The blade scratch test (25×25mm square) has strong adhesive force and does not peel off easily. Seal the pole and wrap the top to prevent the entry of water and gas, and the measures for waterproof and internal leakage are reliable.