BETTER TOUCH BETTER BUSINESS
Contact Sales at Litel Technology
Latest products
Wrong installation method of led solar street light
by：Litel Technology
2022-05-16
Wrong installation method of led solar street light
There is also a wrong way to install led solar street lights, which leads to abnormal lighting, which affects the lighting time, and the distance between the lines is very long, and then you can buy two-core wires on the market to connect them. Just like this, some customers are separated by a distance of more than ten meters or even longer, and there are random installations. At this time, the controller will not let the lights turn on, and in any case, they will press it randomly.
The led solar street light completely relies on solar panels to generate electricity to maintain its lighting, so the street light cannot be turned on or the lighting time is very short. For example, the line loss is large.
So the charging efficiency will be reduced a lot. The street lights next to it are on. In some locations, the solar panels can’t be charged or are charged very little due to too much interference from the installation of solar panels. Some construction workers don’t know the function of the remote control. As a result, the controller of the solar street light detected the light source and mistakenly thought it was daytime. Because the quality of the general wire on the market itself is not very good, some grassroots construction workers do not understand the relevant knowledge of led solar street lights. There are other street lights next to the solar street lights. It doesn't matter if the light is on. In fact, the parameters may have been set incorrectly at this time. When night falls, simply separate the solar panel and the light a long distance.
There is also a wrong way to install led solar street lights, which leads to abnormal lighting, which affects the lighting time, and the distance between the lines is very long, and then you can buy two-core wires on the market to connect them. Just like this, some customers are separated by a distance of more than ten meters or even longer, and there are random installations. At this time, the controller will not let the lights turn on, and in any case, they will press it randomly.
The led solar street light completely relies on solar panels to generate electricity to maintain its lighting, so the street light cannot be turned on or the lighting time is very short. For example, the line loss is large.
So the charging efficiency will be reduced a lot. The street lights next to it are on. In some locations, the solar panels can’t be charged or are charged very little due to too much interference from the installation of solar panels. Some construction workers don’t know the function of the remote control. As a result, the controller of the solar street light detected the light source and mistakenly thought it was daytime. Because the quality of the general wire on the market itself is not very good, some grassroots construction workers do not understand the relevant knowledge of led solar street lights. There are other street lights next to the solar street lights. It doesn't matter if the light is on. In fact, the parameters may have been set incorrectly at this time. When night falls, simply separate the solar panel and the light a long distance.
Custom message
