Small knowledge of high pole lamp touch-up paint solar street light-litelsolar manufacturer

One of the links in the production of street light poles is the plastic spraying process. Plastic spraying can also be said to be the last link in the production of light poles. This link plays a pivotal role in the entire production process, because it will ultimately determine the street light. The overall appearance of the rod is good or not. Some special cases need to be refurbished after spraying, such as 'after spraying, it is found that the flange size does not match the diagonal size of the anchor bolts, or the position where the lamp arm is installed is not reserved for threading holes'... In short In such a situation that needs to be changed, the most commonly used method is gas cutting. We know that gas cutting relies on high temperature to cut and melt the steel plate, that is to say, under the influence of high temperature, the plastic powder on the surface of the light pole will be baked in a large area. . If the spray color of the street light pole is white or black, it's okay to say, if the spray color is unconventional, such as 'blue, gray, pink'...that would be troublesome. Why do you say that white and black paints are fine, because white and black self-spraying paints can be bought everywhere, but unconventional colors are different, such as gray, gray self-spraying paints can also be bought, but there is no guarantee that they will be the same as spraying plastics. Because the color of spray plastic has dark gray and light gray, and blue has dark blue and light blue, it is impossible for the self-spraying paint bought in the market to be exactly the same as the color of plastic powder. If the position that is baked by flame gas cutting is covered with paint of different colors, it will form a sharp contrast with the original paint. When encountering an unconventional color spray lamp pole that needs to be repainted, the best way is to adjust the paint. Take a sample (such as a street lamp pole door cover) to the paint adjuster of the paint store, and let the paint adjuster follow the sample. Debug the color until the debugged paint matches the sample. After debugging, the paint is almost the same color as the plastic spray, so that an ideal effect can be achieved by repainting on the light pole after spraying. If you need to know more, you can contact us directly. Yangzhou Global Solar Technology Development Co., Ltd. is located in Yangzhou, Jiangsu Province, the 'Hometown of Street Lights in China'. The company integrates design, research and development, production, sales and after-sales, and is a provider of road lighting and system solutions.