Configuration composition and safety requirements of high pole lights

Configuration composition and safety requirements of high pole lights
The use of high pole lights is not very widespread. The height requirements for high pole lights are 15 meters to 30 meters, and some places are even higher, usually in factories, squares, boat ports, etc. It is used in places where a large area of u200bu200blighting is needed. Although its use is not as widespread as other street lights, there are also many places where it needs to be used, so we also need to know the configuration and composition of the high pole light and its safety requirements. . The high pole lamp is composed of lamp pole, lamp holder, internal lamp electrical and basic department. The shape is generally a cylindrical single body, but the shape and size of the lamp pole are different. Generally, it is divided into 3 joints. Form a light pole, gradually decreasing from bottom to small. When high-pole lamp manufacturers produce high-pole lamps, they usually configure a lifting system, and the staff can control the entire lamp panel through the lifting system. In view of the high design requirements of high pole lights, the safety requirements for high pole lights must be very high, and its quality must also be rigorous. If its safety index and quality do not meet the requirements, the probability of danger is Very big, once dangerous consequences occur, it is difficult for us to phenomenon. Therefore, for safety reasons, the design of the high-pole lighting must have a maximum wind resistance of 60 meters per second. The Ah-Wah lifting system is configured to operate at a very slow speed. The speed is 3-5 meters per minute. .