Application range and effect of flood light
Floodlights are lamps that specify that the illuminance on the illuminated surface is higher than that of the surrounding environment. Also known as spotlight. Generally, it can be aimed at any target and has a layout that is not affected by climatic conditions. It is mainly used in large-area operation sites, building outlines, stadiums, overpasses, monuments, parks and flower beds, etc. Therefore, almost all large-area lighting fixtures used outdoors can be regarded as floodlights. The cast light has bright colors, good monochromaticity, soft light, low power, long life, and light-emitting time of up to 50,000 hours. Moreover, its LED flood light has a small body, is easy to hide or install, is not easy to be damaged, has no heat radiation, is beneficial to shelter the illuminated object, and has a very wide range of applications. The lamps are equipped with a scale plate to facilitate adjustment of the illumination angle. The outdoor floodlight is controlled by a built-in microchip. In small-scale engineering applications, it can be used without a controller, and can achieve gradation, jump, color flashing, random flashing, and gradual alternation. Dynamic effects such as chasing and scanning can also be achieved through DMX control. The beam of the floodlight is the most accurate, the reflection effect is the best, the symmetrical narrow-angle, wide-angle and asymmetrical light distribution system, the open type to change the bulb, easy to maintain, the lamps are equipped with a scale plate to facilitate the adjustment of the illumination angle.
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist