3m 4m 5m 6m 8m 10m 12m Round Tapered Steel Pole Hot Dip Galvanized High Quality Street Light Pole
- Pole Shaft - The pole shaft is a one-piece assembly conforming to ASTM A595 Grade A or A572 Grade 55 with a constant linear taper of 0.14 in/ft.
- Pole Top - A removable top cap is provided for poles receiving drilling patterns for side-mount luminaire arm assemblies. Other pole top options include Tenon Top, Top Cap Only or Open Top which is typical when the pole top diameter matches the necessary slip-fit dimensions.
- Hand Hole - A reinforced hand hole with grounding provision is provided at 1'-6" from the base end of the pole assembly. Each hand hole includes a cover and cover attachment hardware. Poles with a 5.90" base diameter are supplied with a 3" X 5" rectangular hand hole. All other pole assemblies are provided with a 4" X 6.5" oval hand hole (dimensions are nominal).
- Base Cover - A two-piece full base cover fabricated from ABS plastic is provided with each pole assembly. Additional base cover options, including a cast aluminum and fabricated steel cover, are available upon request. A two-piece steel full base cover is required for some applications depending on the finish requirement and/or pole base square. Factory reserves the right to provide a two-piece steel full base cover on some applications depending upon the finish requirement and/or pole base diameter.
- Anchor Bolts - Anchor bolts conform to ASTM F1554 Grade 55 and are provided with two hex nuts and two flat washers. Bolts have an "L" bend on one end and are galvanized a minimum of 12" on the threaded end.
- Nut Covers - Nut covers can be substituted on most models.
Finding the right amount of illumination for your outdoor space can be tricky. You want a commercial light pole that is powerful, long-lasting and affordable. With the use of 4-inch steel square light poles, you can easily find the right lighting solution for your parking lot. Perfect for roadways, parking lots, and other areas in need of extra lighting at night, these 4-inch steel square light poles are an attractive and affordable way to ensure the safety and security provided by proper nighttime lighting. Our 4-inch steel square light poles feature two drill holes, each 180 degrees from each other. These commercial grade light poles are mechanically cleaned, coated with a baked-on powder topcoat, and painted dark bronze.
Pole Shape
| Material: | Hot rolled steel, Q235,Q345,S235,S355,SS400,Gr 50 |
Yield strength of Material: | Minimum yield strength>=235n/mm2 for Q235, S235 and SS400 Minimum yield strength>=345n/mm2 for Q345 S355 and Gr 50 |
Pole’s height | 3m –15m |
Length of one par | Within 16m once forming without slip joint |
Wall thickness | 2.3mm-30mm |
Pole's Shape Can be made | Conoid ,Multi-pyramidal,Columniform,polygonal or conical |
| Arm type can be made | Single or double brackets/ arm are in the shape and dimension as per customers requirement |
Arm Diameter | Diameter as 42mm, 48mm, 60mm, 76mm and etc, can fit to any diameter’s lamps. |
Painting color: | (RAL)Color card or Refer to client’s requiremen |
| Surface treatment 1: | Black pole, Rough pole Galvanizing, Lifetime is 3 to 5 years |
Surface treatment 2 | Hot dip Galvanizing anti-rust Lifetime is 20years |
| Surface treatment 3: | Hot dip Galvanizing with Color polyester powder coating Lifetime is 20 to 25year |
Temperature range | 35 °C~+45 °C |
Wind Speed | Against wind pressure of 120Km/h to 180Km/h, it according to client’s design. |
Base plate mounted | Base plate is square, octagonal or round in shape with slotted holes for anchor bolt and dimension as per customer’s requirement. |
Ground mounted | The length buried underground as per customer’s requirement. |
| Welding | Submerged arc welding for the mainly pole. |
Installation height | Light pole types |
≦2m | Columniform |
3m-5m | Conoid & Columniform |
≧5 | Conoid |
Light pole types | lighting fixtures |
≧4m Columniform | Solar garden light, UFO solar street light,all in one solar street light,solar flood light |
self-bending arm | All in one solar street light, 110V/220V street light |
≧5 | Split-type solar street light |
Model No. | Height | Thickness | Top Diameter | Bottom Diameter | Base Plate | Material |
LTPZZ-5M | 5m | 2.5mm | 60mm | 132mm | 250*250*10mm | Q235 |
LTPZZ-6M | 6m | 2.5mm | 60mm | 132mm | 250*250*10mm | Q235 |
LTPZZ-7M | 7m | 2.5mm | 60mm | 132mm | 250*250*10mm | Q235 |
LTPZZ-8M | 8m | 2.5mm | 60mm | 150mm | 300*300*12mm | Q235 |
LTPZZ-9M | 9m | 2.5mm | 60mm | 150mm | 300*300*12mm | Q235 |
LTPZZ-10M | 10m | 3.5mm | 80mm | 200mm | 350*350*16mm | Q235 |
LTPZZ-11M | 11m | 3.75mm | 80mm | 200mm | 380*380*18mm | Q235 |
LTPZZ-12M | 12m | 3.75mm | 80mm | 200mm | 400*400*20mm | Q235 |
Choose from tapered and non-tapered pole designs and heights of up to 60 feet (18 meters). Many of our light poles and brackets also accommodate single or multiple luminaire mounting, giving you greater flexibility in your outdoor lighting design. Choose from sleek and stylish poles for decorative post top lighting fixtures to street lighting poles that have what it takes to provide illumination for roadways over many years.
Contact us
Add: No. 1718,Airport Rd., Yuncheng St., Baiyun Dist., Guangzhou City, Guangdong, China
Better Touch Better Business
Contact Sales at Litel Technology
+86 20 3602 8881