TAPERED ROUND STEEL SECTIONAL STEEL POLES

A lamp post is a great way to bring about a new personality to your front entrance or neighborhood park. It both forms a function and can carry a nostalgic aesthetic with it. We can capture a variety of looks with even our basic light poles: square, tapered, round. You can even add a decorative base cover to them as well. To get an idea started on what that may look like, you can look at our other lamp posts. These are made of Q235. It is durable anti-corrosive. All these posts are versatile to fit with any luminaires, mortised, tenoned, and drilled for top or side mounts.

This light poles are located on the road sides for the installation of lighting fixtures on streets, roads and garden. long arm on top of the pole is available. The arm for mounting the light fixture at the end. The lighting poles are made of high quality steel and galvanized. In this case, the outside environment does not suffer corrosion for years in difficult conditions.

Sectional Steel Poles are manufactured from special high tensile, low alloy and corrosion-resistant sheet steel, formed in the shape of round, tapered tubes in standard lengths.Sound engineering design of tapered conical sections and controlled overlap of sections contribute to the overall efficiency of these poles. Standard on most poles are extra-large hand holes to allow workers to get their hands inside the poles easily, even with gloves on.

SIMPLICITY OF ASSEMBLY

Poles of a wide variety of lengths are quickly assembled in three easy steps:

1. Poles are laid out in the order of assembly, end to end (sections are numbered).

2. The small end of the base section is inserted into the large end of the next section by hand.

3. The sections are driven together one by one by either using a powered source or tamping them by hand (with a wooden block to protect the sections) to the marked overlaps. Using no bolts and no clamps, the sections are locked together by the conical taper. The Polefab Sectional Steel Poles are now ready to have attachments and wiring assembled prior to erection.

EFFICIENCY IN TRANSPORTATION

With the ability to nest the lightweight sections together, transportation of Sectional Steel Poles is greatly simplified. Poles can be carried by almost any type of trucks (including pick-up trucks and small vans) instead of having to employ costly pole-hauling equipment.

Sectional design allows for ease of transport to remote or otherwise tough to access sites, be it via truck, sled or air freight.

DEPENDABILITY OF THE POLE

Light weight means greater safety. Sectional Steel Poles, when subjected to severe stress or damage, will not break: but rather buckle in one section. Repairs can usually be carried out by the removal of the damaged section and replacement with a new one.

SAFETY BY DESIGN

Combining the light weight, thin steel and large diameter design with the built-in frangible safety base, Sectional Steel Poles stand out in terms of safety. Specifically:

Sectional Steel Poles have a greater ability to absorb and distribute the energy of an accident on impact due to their larger diameter and thinner high tensile steel, resulting in less damage to the vehicle.

The frangible safety base is reinforced by a welded ring that, when impacted hard enough, causes the pole to shear off near the base plate, significantly reducing damage to the vehicle and its surroundings.

Screw the pole into the base from a vertical position, as this prevents cross-threading.

With one person, threading the pole into the base may take 3 to 5 minutes due there being approximately 5 inches of thread.

Installation Overview*

You should install your street light onto a cement pad -- the pad itself should be the depth of your local frost line. The base pad should be poured cylindrically with a width of not less than 2 inches larger than the diameter of the base.

You will need four (4) L-Shape bolts measuring 1/2 in. x 12 in. to 18 in. for installation (not provided, but you may obtain these at your local hardware store).

The electrical conduit containing the main electrical wire should protrude through the center of this cement pad. Connect the base of the light to the cement pad using nuts and connect the main electrical wire to the leads extending down from the socket assembly (standard) or the ballast/socket assembly (optional).

Note: The attached templates will typically not print to scale. These templates are only for reference. We recommend that you cut a wood template form using the measurements we provide here. We insist that you confirm the accuracy of your wooden form by physically holding it up against the base and confirming the alignment.

Street light poles are the backbone of street lighting, and their use case extends from providing adequate lighting to the beautification of urban spaces. As a street light pole manufacturer, Litel offers a wide range of street light poles, with mounting height ranging from 5m to 12m and different arm brackets.

This high mast Lighting Poles are mainly suited to residential and commercial subdivisions and developments including recreational pathways and parks.