2m 3m 4m Galvanized garden Light Poles Q235 Stainless Steel Lamp Post

A lamp post is a great way to bring about a new personality to your front entrance or neighborhood park. It both forms a function and can carry a nostalgic aesthetic with it. We can capture a variety of looks with even our basic light poles: square, tapered, round. You can even add a decorative base cover to them as well. To get an idea started on what that may look like, you can look at our other lamp posts. These are made of Q235. It is durable anti-corrosive. All these posts are versatile to fit with any luminaires, mortised, tenoned, and drilled for top or side mounts.

This light poles are located on the road sides for the installation of lighting fixtures on streets, roads and garden. long arm on top of the pole is available. The arm for mounting the light fixture at the end. The lighting poles are made of high quality steel and galvanized. In this case, the outside environment does not suffer corrosion for years in difficult conditions.

Look down any neighborhood lane or main street, and you’ll notice that the lights not only illuminate that street, they help to define it. We understand that. It’s why municipalities, developers, architects, historic preservation boards and urban renewal professionals trust Litel and its vast selection of traditional, historic and modern structures and accessories for their street lighting.

Screw the pole into the base from a vertical position, as this prevents cross-threading.

With one person, threading the pole into the base may take 3 to 5 minutes due there being approximately 5 inches of thread.

Installation Overview*

You should install your street light onto a cement pad -- the pad itself should be the depth of your local frost line. The base pad should be poured cylindrically with a width of not less than 2 inches larger than the diameter of the base.

You will need four (4) L-Shape bolts measuring 1/2 in. x 12 in. to 18 in. for installation (not provided, but you may obtain these at your local hardware store).

The electrical conduit containing the main electrical wire should protrude through the center of this cement pad. Connect the base of the light to the cement pad using nuts and connect the main electrical wire to the leads extending down from the socket assembly (standard) or the ballast/socket assembly (optional).

Note: The attached templates will typically not print to scale. These templates are only for reference. We recommend that you cut a wood template form using the measurements we provide here. We insist that you confirm the accuracy of your wooden form by physically holding it up against the base and confirming the alignment.

Street light poles are the backbone of street lighting, and their use case extends from providing adequate lighting to the beautification of urban spaces. As a street light pole manufacturer, Litel offers a wide range of street light poles, with mounting height ranging from 5m to 12m and different arm brackets.

This 2m 3m 4m Street Lighting Poles are mainly suited to residential and commercial subdivisions and developments including recreational pathways and parks.