The start and close time of solar led street lights are determined by the controller

The lighting time adopts microprocessor and special control algorithm.

The external adjustment buttons can be adjusted manually.

The startup and shutdown time of solar led street lights are mostly adjusted by remote controllers on the market. However, when solar led street lights leave the factory, such controllers must adjust the working time and use them normally after repair and compensation. However, the current lithium battery storage The control all-in-one machine is mostly installed at the bottom of the solar panel. The adjustment of the solar street light controller is divided into manual adjustment and remote control adjustment. The load mode of the led solar street light adopts pure light control.

Using direct charging and floating charging to connect rechargeable batteries to realize intelligent control is determined by the street lamp controller. Most of the controllers are set inside the lamp door, which reduces the voltage loss of the circuit by nearly half compared to the use of diodes. PWM energy-saving control, when over-discharge occurs, solar led street lights scientific battery management method, battery voltage promotes charging, must be equipped with remote control charging circuit adopts dual MOS series control loop, so that the charge is controlled more accurately, and it has high precision. Temperature compensation greatly increases power consumption. The light sensor system will automatically turn on when the light is dark. Generally, the working time has been set according to customer requirements.