The production process of traffic signs solar street light-litelsolar manufacturer

1. Blanking. According to the requirements of the drawings, national standard steel pipes are used for the production of uprights, layouts, and uprights, and those that are not long enough to be designed are welded and the aluminum plates are cut. 2. Stick the bottom film. According to the design and specification requirements, the bottom film is pasted on the cut aluminum plate. Warning signs are yellow, prohibition signs are white, directional signs are white, and wayfinding signs are blue. 3. Lettering. Professionals use a computer to engrave the required characters with a cutting plotter. 4. Paste words. On the aluminum plate with the bottom film attached, according to the design requirements, paste the words engraved with the reflective film on the aluminum plate. The lettering is required to be regular, the surface is clean, and there should be no air bubbles and wrinkles. 5. Inspection. Compare the layout of the logo that has been pasted with the drawings, and require full compliance with the drawings. 6. Installation. For small signs, the layout can be connected to the column at the factory. For large signs, the layout can be fixed to the uprights during installation to facilitate transportation and installation. Yangzhou Global Solar Technology Development Co., Ltd. has always paid attention to product quality and adhered to the tenet of 'Quality is the life of an enterprise'. At the same time, we have always paid attention to the research and development of new products and listened to customers' opinions humbly, which has enabled us to continue to grow and develop in the market competition. 'Quality first, reputation first, customer first' is our consistent tenet, and 'survive by quality, seek benefit from management' is our corporate creed, and we wholeheartedly provide the best services to our new and old customers.