The correct use and installation of LED street lights

The correct use and installation of LED street lights

If the LED street light can better meet its night-time use requirements, meet people's use needs, and meet its normal use, it needs to pay more attention to its related use methods during use, especially How it is installed. When using high-power LED street lights, it must be installed in accordance with the actual lighting requirements of the site lighting, and the position and height of the lamps must be adjusted. To determine the correct use of LED high-power street lights, it is necessary to determine the appropriate installation method of the lamp, adjust the mounting bracket, and then prepare a three-core cable of the corresponding length according to the distance from the lamp to the power supply. After that, open the buckle on the front of the lamp by hand, open the upper cover of the lamp, and introduce the cable into the lamp cavity through the cable introduction hole patched at the back of the lamp. Connect the cables according to the polarity marked on the terminal block inside the lamp. One thing to note is that after the LED street light is connected to the wire, it is necessary to use the wire press to compress the cable. Insert the light pole into the introduction hole of the mounting bracket, and select the appropriate position of the light pole in the bracket tube according to the angle required for lighting, and tighten the compression bolt of the light pole to stabilize the connection between the light pole and the lamp.