Portable Upright Stanch Equipment for light pole installation

Portable Upright Stanch Equipment

1. Select an appropriate installation direction and then screw two L-shaped ground cage hooks and anchor cage bolt screws into a safe depth of 20 mm.

2. Put the two mounting holes at the bottom of the flange of the light pole at the corner of the two L-shaped ground cage hooks.

3. After placing the equipment at the bottom of the light pole, fix the round hole of the connecting plate for the front end of the equipment with screws and an L-shaped ground cage hooks to lock the clamps of the equipment.

4. Turn on the power switch until the light pole is upright, then fit the four mounting holes of the flange with anchor cage bolt screws, tighten the nuts, and then disassemble the L-shaped ground cage hooks in turn.

Warning:

1. The bolts must be at least 60-70mm long above the ground during the installation of ground cage.

2. Dismantling the L-shaped ground cage hook must be disassembled and fixed one by one.

3. No standing under the light pole during the construction of street lights.