loading

How to debug solar street lights installed in rural areas

by:Litel Technology     2022-05-23
When buying rural solar lights, there are various worries besides price and quality. This morning, a customer in Xingtai asked how to debug the solar street lights installed in rural areas, and what if they did not light up after installation? The solar street light manufacturer litelsolar will explain to you how to debug solar street lights. A simple test should be performed before the vertical pole of the solar LED light. Connect the positive and negative wires of the lamp socket of the LED light to the controller. The wire diameter should meet the maximum current requirement of the LED light, and reduce the wire resistance as much as possible; connect the battery and the The controller is installed in the control box, and the positive and negative wires of the battery are connected to the controller to test the charging function of the solar photovoltaic panel to the battery and the discharging function of the battery to the LED lamp. After the test is correct, we fix the components of each part, the solar panel is fixed on the solar panel bracket, the lamp head is fixed on the pick arm, and then the bracket and pick arm are fixed to the main pole, and the connecting wire is passed to the control box (battery). box). Then check whether the fasteners in each part are firm, whether the lamp head is installed correctly, and whether the light source works normally. Loosen the connecting wire of the controller and the solar panel, the light source works normally, and the light is off when the connecting wire of the solar panel is connected; at the same time, carefully observe the changes of the indicators on the controller to ensure that the data is normal. Put the battery into the battery box, connect the cable to the controller according to the technical requirements, connect the battery first, then the load, and then the solar panel; during wiring operations, be sure to pay attention to the different wiring and the terminals marked on the controller. If it is wrongly connected, the positive and negative polarities cannot collide, and cannot be reversed, otherwise the controller will be damaged. Before the solar street light is assembled and hoisted, a brief test should be performed on the lithium battery and other equipment to see if the light source can be lit, so as to prevent the light from being turned on after the vertical pole is completed. So when you buy a rural solar street light, you don't have to worry about what to do if it doesn't turn on after installation. The solar street light manufacturer will conduct 1-2 debugging before installation to ensure that the light can be normally turned on before the pole is erected.
Anyone who has seen the latest solar led flood lights suppliers solar lights in operation cannot help but be impressed with how far the technology has progressed over the past few years.
Energetic, optimistic entrepreneurs often tend to believe that sales growth will take care of everything, that Guangzhou Litel Technology Co.,Ltd. will be able to fund our own growth by generating profits.
Basically, you cannot have a solar led flood lights suppliers without having the right solar lights. Since you are going to use it regularly, be sure to invest in one that has a high quality.
Simultaneously being able to offer not only the product but also the service, gives the customer a quality 'one-stop-shop' service.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...